Touch the role of the all-in-one machine

           Touch the role of the all-in-one machine

For the touch of the all-in-one machine touch can not be used, Kadon did not respond to failure how to do? There are many reasons for this, such as the connection of the touch screen is loose and whether it is connected correctly, water droplets or dust on the machine, improper installation of the program or hardware occupation of high reasons. Then let's introduce in detail the solution to the problem that the all-in-one touch can't be used.

Touch all-in-one machine has no response to touch any part:

1.Check whether the connection interface is loose, check whether the touch screen connection is right; Whether the serial port of each link line is connected to each other or conflicts.

2. Touch the sticky water or dust on the all-in-one machine, just wipe it with a dry soft cloth.

3. Check whether the hardware of the machine is matched reasonably. It may be that the host configuration is too low, leading to too long response time.

4.When installing the driver debugging is not in place, there is a vertical touch target center position.

5. If there is no signal interfering with the touch-all machine, the touch-all machine can be used normally. If not, restart the touch-all machine and see if the touch screen can be used.

6. After restarting the touch all-in-one machine and reinserting the USB interface, if the touch screen still fails to work normally, it may be that the touch screen driver is incomplete. Please reinstall the system.

7. It is also possible that the touch screen is broken and the user needs to replace the touch screen.

If the above touch all-in-one machine cannot touch, it is recommended to find relevant professional maintenance personnel for detection and maintenance. If you want to know more, please pay attention to our company's website.

Website: www.lcdbvs.com 

Alibaba store: www.lcdbvs.en.alibaba.com 

www.bvsion.en.alibaba.com